MRCS Cutter Set consists of Arrow head, Boring Gimlet, 1-1/2 U-Cutter, 2" Side Cutter Blades. Other cutters available.
1/3 hp, with forward-off-reverse switch, spring-loaded mounting for proper belt tension. 165 rpm at load speed.
Leaves operator's hands free to control cable. Uses air pressure, so there's no electrical contact between pedal and motor.
You can take the drum off the Mini-Rooter Pro in seconds. The drum carries up to 75 ft of 3/8" cable to clear 2" to 3" lines, or 1/2" cable for heavier work in 4" lines.
The handle is tall enough to make it easy to roll to the job, yet it can be quickly folded to take up less room in your truck. Some Mini-Rooter Pro safety features: A foot pedal that uses air pressure to start and stop the machines, with no electrical wiring between the pedal and motor, a ground fault circuit interrupter, and a high impact plastic guard covering the motor pulley. Six inch semi-pneumatic wheels roll easily over rough terrain to and from the job.
Weight: 43 lbs. (19.5 kg) (without cable)
20" D x 16" W x 38" H (20" H with handle folded)
Capacity of 75 ft. x 3/8" or 1/2" Flexicore cable. Integral distributor tube. Quickly removable from frame.
Heavy gauge wire is coiled around 49 strand wire rope and then heat treated. This cable has unequalled strength and the right amount of flexibility. It's so tough, it has a one year warranty against defect or breakage.
For small drain work, you can order your Mini-Rooter Pro with a J-Drum for handling smaller, more flexible cables. J-Drum capacity of 50 ft. of 1/4" or 5/16" Flexicore cable.