SRCS Cutter Set:
3SCB, 4SCB 3" and 4" Side Cutters, 3HDB 3" Heavy Duty Saw Blade, SHD Spear Head, 2UC 2" U-Cutter, 4RSB 4" Rotary Saw Blade, RTR-2 Large Retrieving Tool, LE-3 Flexible Leader, 26" long.
The Maxi-Rooter has a surprisingly slim 23" profile that lets you work in some very tight spots. You can get the machine through just about any door you're likely to run into with room to spare.
Power Cable Feed:
Maxi-Rooter's power cable feed not only drives the cable into the line but has the pulling power to retract it, even on long, tough runs. Without reversing the cable rotation, you instantly can alter feeding speed to match the resistance in the line. Chew into stoppages as slowly as one inch per minute and retract the cable as quickly as twenty feet per minute.
Cable Guide Tube:
Adds safety when you can't get machine close to drain opening. 5 ft. extension attaches to cable guide tube.
For easy truck loading, tip the Maxi-Rooter on its loading wheel, then lift and slide into truck using the lift handle on front leg of machine.
Convenient Tool Box:
Can hold a full cutter set, except for leader.
V-belt Stair Climbers:
V-belt stair climbers like the ones used to move heavy furniture and appliances let you take the Maxi-Rooter up a flight of stairs yourself. Heavy-duty V-belts running on nylon rollers.
Truck Loading Wheel:
Makes it easier to lift machine onto bed of truck.
With double-reinforced palm for hand protection when guiding cable.
Weight: 146 lbs. (67 kg) without cable
Capacity of 129 ft. (39m) of 3/4" or 154 ft. (46m) of 5/8" cable.
Includes 4 ft. of drum connecting cable.
3/4 hp heavy duty with capacitor start and forward-off-reverse switch;
20 ft. power cord with molded plug (3 wire 16 gauge) and ground fault circuit interrupter;
Load Speed: 160 rpm.
Leaves operator's hands free to control cable. Uses air pressure, so there's no electrical contact between pedal and motor.
27" deep; 23" wide; 42" high (68 cm x 58 cm x 107 cm).
10" semi-pneumatic heavy duty with ball bearings.
Heavy gauge wire is coiled around 49 strand wire rope and then heat treated. This cable has unequalled strength and the right amount of flexibility. It's so tough, it has a one year warranty against defect or breakage. 3/4" diameter for 4-10" lines and 3" lines without sharp bends. 5/8" diameter for 3-6" lines.